Please select the a question
We avoid strong chemical cleaners especially if they contain ammonia because they can corrode the installed film.
In our store we have mild cleaners that are friendly to installed films.
Clean with a soft microfiber.
Because by putting a low-quality window film, its adhesive compounds begin to weaken, resulting in bubbles like blistering.
Based on the current legislation, the light transmittance of the driver-passenger windows and front windshield must be 75% or more.
There is no restriction on the rear windows and the rear windshield.
The film is cut and heated externally so that it can be installed internally.
No because the water falls inside the door and leaves through the gutters.
After a total of two days, you can lower the windows of the car.
No, there is no problem, they work as expected.
Installation depends on the type of car and the number of windows.
Usually the installation is completed within two hours for a five-door car, and if a front window is what the customer also wants installed, around three hours total.
The Greek KTEO asks to see if it has been installed with materials certified by the European Union.
Xpel films meet these specifications and you won't have any issues.
Depending on the car, in some models we simply remove the upper seal so that the film passes below so that it does not peel off when using the window/s.
10 years warranty for the products, and it covers that it will not turn purple, it will not bubble-up (blisters) and it will not peel off. XPel© is a pioneer in the field of warranty and transfers the warranty to the next owner of the car so your investment does not lose its value.
Business hours and contact information can be found at the "Contact" Page.
More questions
If you still have something to ask that is not covered above then don't hesitate to contact us
You could also book an appointment to discuss things inside the store
Contact FormAppointment
© 2022 — 
English 
Ελληνικά